Building it? The $35 builder's plan dimensions every stud and every cut. See sample sheets
Planner checks
12 planner checks passed at 30 psf of snow.
Each bar is what this design asks of a part against the limit in its table at 30 psf of snow: the span for the framing, the length for the tightest brace panel. The open part of the bar is allowance this design does not use, measured against the limit that governs.
Rafters3' 11-1/4"of 11' 2-3/16" allowed65% of the allowed span unused; bending governs
Floor joists3' 10-1/4"of 7' 7-3/8" allowed49% of the allowed span unused; bending governs
Window header2' 3"of 8' 5/16" allowed72% of the allowed span unused; bending governs
Brace panel16"of 24" built50% longer than the shortest panel allowed
what this design asks room to spare
Green meets the code table or the maker's rating we checked against, amber asks you to confirm something on the product or on your site before you buy, red fails the table. Planner checks don't replace your local building department or a look at your own site.
10' 9-5/8" from the top of the gravel pad to the top of the roof sheathing at the ridge; the roofing adds its own thickness
Framing
2x4 walls at 16" OC, 2x6 rafters at 16" OC, 2x6 joists at 16" OC
Foundation
3 pressure-treated 4x6 skids on a gravel pad
Door
double door, 48" x 74-1/2" on the front wall (rough opening)
Windows
2 x 24" x 24" rough opening
Doors
built on site from a 2x4 frame and a siding skin
Longest board
16 ft
Ground snow load
30 psf, put on the roof whole
The frame
Rafters
2x6 at 16"
Floor joists
2x6 at 16"
Studs
2x4 at 16"
Foundation
3 skids
Rafters
26 2x6, 59-9/16" plumb cut to plumb cut, cut from 62-5/16" stock
Ridge
2x8, 16'
Rafter ties
11 2x4 at 96"
Floor
13 2x6 joists at 93" between 16' rim joists
Lumber
125 boards, 5.1% offcut
Splices
None: every member is a single board
Cost and time
What it takes to build.
Shed materials, before the gravel pad$4,448.19
Framing lumber and sheathing$2,516.61
Roofing and finish$931.62
Hardware and foundation$657.39
Doors and windows$342.57
Shelf prices from Home Depot, Bronx Terminal store, read Sep 30, 2026, with a few lines from other stores. Before sales tax, delivery and tools.
Every line of the shed's materials list has a price. This sum mixes five stores: 16 ft skids and Z-flashing are priced at Home Depot, Hamilton Mill store (ZIP 30011), Sep 30, 2026; 2x12 portal header, house wrap (closest available), ridge straps, portal straps and strap nails at Menards.com, no store selected, Oct 10, 2026; 1x4 exterior trim board, 16 ft at Home Depot, Hamilton Mill store (ZIP 30011), Oct 20, 2026; treated subfloor panels at Menards.com, no store selected, Nov 16, 2026; header-spacer plywood, connector nails, H-clips, flashing tape, caulk, primer, paint, 1x2 stops, hinges, hasp, barrel bolts, door pull, door screws, skin screws and door adhesive at Home Depot, Hamilton Mill store (ZIP 30011), Oct 8, 2026; underlayment cap nails at Home Depot, Hamilton Mill store (ZIP 30011), Oct 11, 2026; LTP4 framing anchors and SD9112 screws at Home Depot, Hamilton Mill store (ZIP 30011), Oct 10, 2026; ground anchors at Amazon.com, sold by Amazon, Oct 13, 2026; windows (closest available) at Menards, Columbus store (ZIP 43229), Oct 8, 2026; two-way latch at Home Depot, Hamilton Mill store (ZIP 30011), Nov 17, 2026; every other line at Home Depot, Bronx Terminal store, Sep 30, 2026. The gravel pad, $209.85, is site prep, priced as bulk stone delivered by the cubic yard (an average estimate), and sits outside the total. Boxes of nails, screws and clips come whole, so about $130.13 of this list stays in part-used boxes: the shed itself uses that much less. Rolls and bundles of roofing and house wrap are sold whole too: about $133.58 of them stays unused on a small design. In Canada: every price here is a US store price in US dollars, not a Canadian shelf price. Convert once, at 1.4222 (Bank of Canada daily USD/CAD rate, Oct 13, 2026), for a rough Canadian-dollar figure; Canadian stores differ.
Materials priced: $4,448.19. every line priced. Excluded: tax, delivery, labor, permits, tools.
Per sq ft of floor
$34.75
Gravel pad, separate
$209.85
Build time
about 80 h
two people new to framing
Labor if you hire it out
$1,024 to $7,680
Separate from the materials.
Lumber$1,175.23
3
4x6 pressure-treated (ground contact), 16 ft4 in. x 6 in. x 16 ft. #2 Pressure-Treated Ground Contact Southern Pine Wood Post
$128.34
14
2x6 pressure-treated (ground contact), 8 ftWeatherShield 2 in. x 6 in. x 8 ft. No. 2 Prime Pressure-Treated Ground Contact Southern Pine Lumber
$150.92
1
2x6 pressure-treated (ground contact), 10 ftWeatherShield 2 in. x 6 in. x 10 ft. #2 Prime Ground Contact Pressure-Treated Southern Yellow Pine Lumber
$12.68
2
2x6 pressure-treated (ground contact), 16 ftWeatherShield 2 in. x 6 in. x 16 ft. #2 Prime Ground Contact Pressure-Treated Southern Yellow Pine Lumber
$42.36
72
2x4 framing lumber, 8 ft2 in. x 4 in. x 8 ft. #2 Premium Grade Dimensional Lumber
$313.20
6
2x4 framing lumber, 16 ft2 in. x 4 in. x 16 ft. #2 Premium Grade Fir Dimensional Lumber
$74.82
2
2x6 framing lumber, 10 ft2 in. x 6 in. x 10 ft. #2 Premium Grade Fir Dimensional Lumber
$25.04
8
2x6 framing lumber, 16 ft2 in. x 6 in. x 16 ft. #2 Premium Grade Fir Dimensional Lumber
$159.68
1
2x8 framing lumber, 16 ft2 in. x 8 in. x 16 ft. #2 Premium Grade Fir Dimensional Lumber
$22.67
2
2x12 framing lumber, 8 ft2 x 12 x 8' #2 & Better Construction/Framing Lumber
$40.24
11
1x4 exterior trim board, 8 ftPrimeLinx 1 in. x 4 in. x 8 ft. Radiata Pine Finger Joint Primed Board
$116.38
1
1x4 exterior trim board, 16 ftCMPC 1 in. x 4 in. x 16 ft. Radiata Pine Finger Primed Softwood Boards
$21.46
2
1x6 exterior trim board, 16 ftCMPC 1 in. x 6 in. x 16 ft. White Primed Finger-Joint Trim Board Primed Softwood Boards
$67.44
Sheet goods$1,252.41
5 sheets
3/4" treated tongue-and-groove subfloor, 4x8AC2 3/4 x 4 x 8 Green Pressure Treated Ground Contact Sturd-I-Floor Tongue & Groove Plywood Subfloor
$449.95
12 sheets
Panel siding, 19/32" T1-11 plywood, APA Rated Siding 303, Exterior (the wall bracing counts on this panel: a plywood wood structural panel 19/32" thick, over the 3/8" IRC Table R602.10.4 asks for CS-WSP; the bracing calculation does not cover a different siding or a thinner panel; the portal frame needs 7/16" or more), 4x8Plytanium Plywood Siding Panel T1-11 8 IN OC (Nominal: 19/32 in. x 4 ft. x 8 ft.)
$561.36
1 sheet
Panel siding for the gable ends, 4x8Plytanium Plywood Siding Panel T1-11 8 IN OC (Nominal: 19/32 in. x 4 ft. x 8 ft.)
$46.78
1 roll
House wrap (water-resistive barrier), 9 ft x 100 ft roll9' x 100' BLOCKADE Woven House Wrap
$82.67
6 sheets
7/16" OSB roof sheathing, 4x8OSB 7/16 Application as 4ft. X 8 ft. Sheathing Panel
$71.88
2 pieces
Z-flashing for the horizontal siding joints, 10 ft piecesGibraltar Building Products 5/8 in. x 10 ft. Galvanized Steel Z-Flashing
$11.96
1 sheet
1/2" plywood for the header spacers, 4x8Plytanium 15/32 in. x 4 ft. x 8 ft. 3-Ply RTD Sheathing
$27.81
Roofing$540.44
6 bundles
Asphalt shingles, 3 bundles per squareGAF Timberline Natural Shadow Charcoal Algae Resistant Architectural Shingles (33.33 sq. ft. per Bundle)
$269.82
1 bundle
Starter strip shinglesGAF Pro-Start 120 lin. ft. Eave and Rake Roofing Starter Strip Shingles
$54.97
1 bundle
Hip and ridge cap shinglesGAF Seal-A-Ridge Charcoal Hip and Ridge Cap Roofing Shingles (25 lin. ft. per Bundle)
$63.97
1 roll
Synthetic roof underlayment, 10-square rollEverbilt 4 ft. x 250 ft. Synthetic Roofing Underlayment - Contractor Grade
$74.98
2 lb
Plastic cap nails, 1-1/2", for the underlayment and the house wrapGrip-Rite 1 in. x 12-Gauge 2-penny Electrogalvanized Ring Shank Roofing Nails with Plastic Cap 1 lb. Box
$25.82
6 pieces
Drip edge, 10 ft piecesAmerimax Home Products F4.5 x 10 ft. White Aluminum Drip Edge Flashing
$50.88
Fasteners and hardware$607.42
21 lb
Framing nails, 16d common, hot-dip galvanized, 3-1/2" x 0.162"Everbilt 3-1/2 in. x 16D Hot Dipped Galvanized Common Nails 5 lbs. (222-Count)
$158.65
6 lb
Toenail nails, 10d box, hot-dip galvanized, 3" x 0.128"Grip-Rite 3 in. x 10-1/2-Gauge 10-penny Exterior Galvanized Steel Box Nails 5 lb. Box
$38.76
14 lb
Siding nails, 8d common, hot-dip galvanized, 2-1/2" x 0.131"Grip-Rite 2-1/2 in. x 10-1/4-Gauge 8-penny Exterior Galvanized Smooth Shank Common Nails 5 lb. Box
$80.94
5 lb
Roof sheathing nails, 2-1/2" (8d)Grip-Rite 2-1/2 in. x 10-1/4-Gauge 8-penny Exterior Galvanized Smooth Shank Common Nails 5 lb. Box
$26.98
3 lb
Exterior screws for the subfloor, 2", rated for treated lumberGrip-Rite #8 x 2 in. #2 Phillips Bugle Head Coarse Thread Coated Exterior Wood Screws 5 lb. Box
Ridge straps, 1-1/4" x 20 ga galvanized steel, 18" long (Simpson Strong-Tie LSTA18 or equal)MiTekยฎ 1-1/4" x 18" 20-Gauge G90 Steel Light-Duty Strap Tie
$17.94
2
Portal header straps, 1-1/4" x 18" galvanized steel (Simpson Strong-Tie LSTA18 or equal, rated 1,000 lb or more)MiTekยฎ 1-1/4" x 18" 20-Gauge G90 Steel Light-Duty Strap Tie
$2.76
3 lb
Nails for the ridge and portal straps, 10d common, 3" x 0.148", hot-dip galvanizedGrip Fastยฎ 3" 10D Hot-Dipped Galvanized Smooth Shank Common Nail - 1 lb. Box
$14.91
4
Framing anchors for the portal frame, Simpson Strong-Tie LTP4 lateral tie platesSimpson Strong-Tie LTP 3 in. x 4-1/4 in. Galvanized Lateral Tie Plate
$3.12
1 box
Simpson Strong-Drive SD9112 connector screws, #9 x 1-1/2", for the LTP4 platesSimpson Strong-Tie #9 x 1-1/2 in. 1/4-Hex Drive, Strong-Drive SD Connector Screw (100-Pack)
$16.65
7 lb
Nails for the portal frame sheathing, 8d common, 2-1/2" x 0.131", hot-dip galvanizedGrip-Rite 2-1/2 in. x 10-1/4-Gauge 8-penny Exterior Galvanized Smooth Shank Common Nails 5 lb. Box
$53.96
5 lb
Roofing nails, 1-1/4"Everbilt 1-1/4 in. x 3D Electro-Galvanized Non-Collated Roofing Nails 5 lbs. (1010-Count)
$21.00
3 tubes
Construction adhesive (subfloor)Liquid Nails Subfloor and Deck 28 oz. Tan Low VOC Construction Adhesive
$23.04
4
Earth auger anchors, 30 in or longer, with a holding rating published by their maker, plus galvanized cable and wire-rope clipsTie Down 59075 Galvanized Cable (Includes 4 Anchors, 8 Clamps, 100 Feet Galvanized Cable)
$50.89
260 nails
Connector nails for the hurricane ties, 0.131" x 2-1/2" galvanizedGrip-Rite 2-1/2 in. x 10-1/4-Gauge 8-penny Exterior Galvanized Smooth Shank Common Nails 1 lb. Box
$25.65
24
Plywood H-clips for 7/16" sheathingSimpson Strong-Tie PSCL 7/16 in. 20-Gauge Galvanized Panel Sheathing Clip (50-Qty)
$12.22
Flashing, sealants and finish$391.18
1 piece
Z-flashing for the door and window heads, 10 ft piecesGibraltar Building Products 5/8 in. x 10 ft. Galvanized Steel Z-Flashing
$5.98
1 roll
Window flashing tape, 4" x 75 ft rollGCP Applied Technologies Vycor Plus 4 in. x 75 ft. Roll Fully-Adhered Flashing Tape
$36.42
3 tubes
Exterior acrylic-latex caulk, paintable, 10.1 ozDAP Alex Plus 10.1 oz. White Acrylic Latex Caulk Plus Silicone
$8.94
3
Exterior primer, 1 gallonZinsser Bulls Eye 1-2-3 1 Gal. White Water-Based Interior/Exterior Primer and Sealer
$89.94
5
Exterior paint or solid stain, 1 gallonBEHR PREMIUM PLUS 1 gal. #52 White Satin Enamel Exterior Paint & Primer
$249.90
Doors and windows$93.98
2
Shed window with a nailing flange, for a 24" x 24" rough openingIPS 24"W x 24"H White Vinyl Single Sliding Utility Window
$93.98
Door build$248.59
6
2x4 framing lumber, 92-5/8" precut stud, for the door frames2 in. x 4 in. x 92-5/8 in. Premium Douglas Fir Stud
$24.90
4
1x2 furring strip, 8 ft, for door stops and the astragal1 in. x 2 in. x 8 ft. Furring Strip Board
$6.16
1 sheet
Panel siding for the door skins, 4x8Plytanium Plywood Siding Panel T1-11 8 IN OC (Nominal: 19/32 in. x 4 ft. x 8 ft.)
$46.78
6
Heavy-duty T-hinges, 8"Everbilt 8 in. Standard Zinc-Plated Heavy-Duty Tee Hinge
$57.00
1
Two-way gate latch, opens from inside and outside without a keyGH Gate Products Black All-In-One Two Sided Gate Latch
$28.98
1
Padlock hasp, for locking the shed when it is emptyEverbilt 4-1/2 in. Zinc-Plated Adjustable Staple Safety Hasp
$5.97
2
Barrel bolts for the fixed leafEverbilt 4 in. Zinc-Plated Heavy-Duty Barrel Bolt
$16.54
2
Door pull handleEverbilt 6-1/2 in. Zinc-Plated Door Pull
$9.96
1 box
Exterior screws for the door frames and stops, 2-1/2"GRK Fasteners #8 x 2-1/2 in. Star Drive Trim Finishing Head Screw (100-per Pack)
$15.38
2 boxes
Exterior screws for the door skins, 1-1/4"GRK Fasteners #8 x 1-1/4 in. Star Drive Trim-Head Finish Screw (100-Pack)
$21.96
2 tubes
Construction adhesive (door skins), 10 ozLoctite PL Premium 10 oz. Polyurethane Construction Adhesive Tan Cartridge (each)
$14.96
Temporary bracing$88.97
9
2x4 framing lumber, 8 ft, for temporary braces and stakes and ridge posts2 in. x 4 in. x 8 ft. #2 Premium Grade Dimensional Lumber
$39.15
2
2x4 framing lumber, 16 ft, for temporary braces and stakes and ridge posts2 in. x 4 in. x 16 ft. #2 Premium Grade Fir Dimensional Lumber
$24.94
1 box
Exterior screws for the temporary braces, 3"Everbilt #9 x 3 in. Tan Star Torx Drive Flat Head Wood Deck Screw (900-Pack)
$24.88
Foundation$49.97
1 roll
Landscape fabric, enough to cover 10' x 18'VEVOR 6 ft. x 300 ft. Premium Weed Barrier Landscape Fabric
$49.97
Labor only, building the shed from the plan (framing, siding, roof, doors), materials not included, for the shed as a shell: insulating, wiring and lining the inside are not in this range. Published ranges (HomeGuide, Aug 2025: $8 to $60 per sq ft; Fixr, Mar 2024: $25 per sq ft), per sq ft from the examples they quote (a 10x10 custom build and a 10x12 wooden shed). 128 sq ft at $8 to $60 per sq ft, middle about $3,200. A range from guides, not a quote; get two local quotes. Separate from the materials above and not in their sum.
2x4 x 8 ft: your list buys 81 boards, which reaches the bulk price. $34.83 less if the store applies it at the register: the card shows $3.92 a board at 50 or more, $4.35 below that (Home Depot, Bronx Terminal store, Sep 30, 2026).
Exterior paint or solid stain: your list buys 5 gallons, which reaches the bulk price. $24.90 less if the store applies it at the register: the card shows $45.00 a gallon at 5 or more, $49.98 below that (Home Depot, Hamilton Mill store (ZIP 30011), Oct 8, 2026).
Prices and tiers as the store showed them on the day we read them. Tips only, not in the totals.
Prices differ by store and by week: type yours into the shed cost calculator to get your own total.
Free and paid, side by side
Design it free. Build it from the $35 plan.
Free
On this page and in the designer, no account
This design in 3D, and every change you make to it
Every planner check, with its rule and source
Cost estimate
About $4,448 in materials, line by line, on this page. See the estimate
Summary PDF
The design, its checks and its materials list on a few pages. A summary, not the build drawings.
You check out in the designer, with this design loaded. If the plan has an error, we fix it or refund you within 30 days. Guarantee terms.
Real sheets from the 74-sheet sample plan for the 8x10 gable shed
The sample was printed on an earlier date, so its prices can differ from the estimate above. Your plan prints the same prices as the estimate.
Wall framing
Cutting plan
Build steps
Shopping list
Build phases
From gravel pad to door trim in 6 phases.
About 80 hours for two people new to framing. Each picture is this design at the end of its phase, drawn by the designer, with that phase's parts in full color.
01about 10 h
Gravel pad and skids
Gravel pad 1 ft wider all round, 3 treated 4x6 skids 46-1/4" on center, corners anchored.
02about 7 h
Floor frame and deck
13 2x6 joists 16" on center, squared, then the 3/4" tongue-and-groove floor.
03about 13 h
Walls
Walls framed flat with 84-1/4" studs 16" on center, then raised and braced. Portal frame at the door.
04about 12 h
Rafters, ridge and gable studs
One pattern 2x6 rafter at 6/12, then 25 more, the ridge and the gable studs.
05about 14 h
Roof sheathing and roofing
6 sheets of 7/16" OSB, drip edge, underlayment and shingles.
06about 25 h
Siding, doors and trim
House wrap, panel siding and trim, site-built doors and the windows.
This is the summary. The $35 builder's plan breaks these phases into a build order with the new parts highlighted, a how-to detail and a check at each step.
For this 8x16 gable design, the materials come to about $4,448 (shelf prices from Home Depot, Bronx Terminal store, read Sep 30, 2026), before sales tax, delivery and tools. The gravel pad is extra, about $209.85. If you hire the build out, labor is commonly quoted at $1,024 to $7,680 on top of the materials. Prices change by store and by week, so the materials list on this page shows every line.
It depends on your town, not on the plan. At 128 sq ft it is under the 200 sq ft exemption in the 2021 IRC (R105.2) but above the 120 sq ft limit many towns still use. Setbacks, height limits and HOA rules can apply even without a permit, so ask your building department before you buy lumber.
On a compacted gravel pad, yes; on loose stone or bare soil, no. This plan sets 3 pressure-treated 4x6 skids on a leveled, compacted pad 1 ft wider than the shed on every side, so the floor frame stays off the ground and water drains away. The pad is priced separately at about $209.85.
It depends on the span, the spacing and your snow load. This plan uses 2x6 rafters 16" on center: at 30 psf of snow each spans 3' 11-1/4" where the table allows 11' 2-3/16", so 65% of the allowed span is unused (bending governs). Change the size or the snow load in the designer and the check runs again.
This plan frames the walls 16" on center. With panel siding nailed straight to the studs, the siding's stamp decides: siding stamped 16 oc needs studs at 16", and only APA Rated Siding stamped 24 oc may go on studs at 24".