Skip to content
Design free
A finished board-and-batten gable shed in a backyard, with a framed wall and rolled-up plans on the workbench in front
Illustration

Free 3D designer $35 building plan

Design it in minutes. Build it with confidence.

Design it in 3D for free. The planner checks every span and prices every board, then draws the plan you build from.

In the planner

A shed like this one

The frame of the 8x10 gable shed, drawn by the designer from its own numbers

8x10 gable80 sq ft6/12 roof

Open this frame in the designer

How one design becomes a plan

One 8x10 shed, from the first click to the cut list.

The 8x10 gable shed, followed through the four things the planner does with every design. Every drawing, number and sheet below is its own output.

The 8x10 gable shed, drawn by the shed designer
3D view
The 8x10 gable shed with its footprint and overall height
Sizes
Inside the 8x10 gable shed, two walls and the roof cut away
From above

Step 01

Draw it in 3D

Pick the size, the roof, the doors, the windows and your snow load. The drawing follows every change you make.

Footprint
8x10 ft
Roof
6/12 gable
Floor
80 sq ft
Open this design
The frame of the 8x10 gable shed, without siding or roofing
11 of 11 passed
  • Rafters and floor4/4
  • Wall bracing4/4
  • Roof and siding3/3

Step 02

Checked live

The rafters, the floor, the headers, the wall bracing and the siding, each against the rule it comes from.

Passed
11 of 11
Snow
30 psf
Status
Ready to plan
Read the report

Materials for this design

About$3,498

  • Framing lumber and sheathing$1,907.90
  • Roofing and finish$753.24
  • Hardware and foundation$541.72
  • Doors and windows$295.58
A sample sheet from the plan for the 8x10 gable shed: the shopping list with store pricesShopping list

Step 03

Priced line by line

Every stud, rafter, sheet and nail, priced from store shelves.

Materials
About $3,498
Lines
64
Per sq ft
$43.73
See the price list

Step 04

The builder's plan

Letter sheets drawn from the design you finish, so every cut and every dimension on them is yours.

Sheets
74
Price
$35 once
Canada
CA$49
Start from this 8x10, free

Compare alternative designs

Not sure about the 8x10 gable? Compare it with the alternatives.

Four other starting designs, each set against the 8x10 gable above: floor area and materials side by side. Turn any of them over in four views, drawn ahead of time by the same engine that writes the plan, then open the one that fits in the free designer.

The 8x10 gable shed, drawn by the shed designer, front view

Pre-drawn views, not the editor

Front

ComparedThe baseline: the design followed through the four steps above

Design
8x10 gable
Floor
80 sq ft
Roof
6/12 gable
Materials
$3,498
Checks
11 of 11 passed
Build
about 60 h

Starting designs

Start from a style, or from a footprint.

38 free plans, each with its own checks and priced materials list. Every one opens in the designer, where you can change anything.

9 footprints, drawn to the same scale

A few from each floor-area band, from the smallest to the largest. The 120 and 200 sq ft lines are common permit thresholds, but the number that applies is your town's. One grid square is 2 ft.

Gable Lean-to Materials at dated store prices, before the gravel pad.

See all 38 plans side by side

Checks

Inspected before you build.

This is the report for the 8x10 gable shed. Your design gets the same one, line by line, as you draw it.

Inspection report

8x10 gable shed

TSP-47W3-RB3V6/12 roof48 in double door30 psf snow

CHECKED AGAINST · IRC 2021 · AWC ·11/11
  1. Rafters strong enough for snow35%max 100%IRC · AWC
  2. Floor joists strong enough51%max 100%AWC span tables
  3. Beam over the window25%max 100%AWC NDS
  4. Wall braced beside the door24 inmin 16 in each sideIRC R602.10
  5. Back and side walls braced48 inmin 24 inIRC R602.10
  6. Roof steep enough for shingles6/12min 2/12IRC R905.2.2
  7. Siding nailed to studs close enough16 inmax 16 inIRC R703.5.2
  8. Siding off the ground6 inmin 6 inIRC R317.1

8 of 11 checks shown. Local approval stays with your building department.

Open this design

Needs a fix

A 72 in door leaves the wall too weak

12 inof wall each side, needs 29 inIRC R602.10

12 in each side
Before
29 in each side
After
FixSingle door 38 in wide

Every design gets this report before you buy the plan. Check yours in the designer

Free designer, $35 plan

Design it for free. Pay once for the drawings you build from.

Free designer

$0no account

  • The 3D design, any size from 4x4 to 16x24 ft
  • Span, bracing and roof checks, each with its source
  • The materials list with dated store prices
  • A summary PDF of the design
Design my shed, free

Builder's plan

$35once, CA$49 in Canada

Everything free, plus the drawings for your design:

  • Every wall framed, each stud dimensioned from the corner
  • The cut list, every cut assigned to a store board
  • Rafter angles and a full-size rafter template: cut to this
  • Elevations, a building section and the connection details
  • The shopping list with store prices and the build, step by step
Get the 8x10 plan

You check out in the designer with the design loaded, and the plan is drawn for that design. If it has an error, we fix it or refund you within 30 days. Guarantee terms

The build

From gravel pad to door trim in 6 phases.

The 8x10 gable shed at the end of each phase, drawn by the designer with that phase's parts in full color. About 60 hours for two people new to framing, from the plan's own step estimates.

  1. 01about 8 h

    The 8x10 gable shed after phase 1: gravel pad and skids

    Gravel pad and skids

    Gravel pad 1 ft wider all round, 3 treated 4x6 skids 46-1/4" on center, corners anchored.

  2. 02about 5 h

    The 8x10 gable shed after phase 2: floor frame and deck

    Floor frame and deck

    9 2x6 joists 16" on center, squared, then the 3/4" tongue-and-groove floor.

  3. 03about 9 h

    The 8x10 gable shed after phase 3: walls

    Walls

    Walls framed flat with 84-1/4" studs 16" on center, then raised and braced. Portal frame at the door.

  4. 04about 8 h

    The 8x10 gable shed after phase 4: rafters, ridge and gable studs

    Rafters, ridge and gable studs

    One pattern 2x6 rafter at 6/12, then 17 more, the ridge and the gable studs.

  5. 05about 10 h

    The 8x10 gable shed after phase 5: roof sheathing and roofing

    Roof sheathing and roofing

    5 sheets of 7/16" OSB, drip edge, underlayment and shingles.

  6. 06about 21 h

    The 8x10 gable shed after phase 6: siding, doors and trim

    Siding, doors and trim

    House wrap, panel siding and trim, site-built doors and the windows.

Questions

Anything else? Write to us or read how the planner checks a design.

Before you start

Building it yourself usually costs less, because you pay for materials and not for the labor. For the 8x10 gable the materials come to about $3,498 at Home Depot, Bronx Terminal store, Sep 30, 2026 shelf prices, before tax and delivery. Hiring the build out is commonly quoted at $640 to $4,800 on top of that. Put the quote for the kit or the installed shed you are considering next to that number.

Yes. The 12x12 gable plan is one of 38 free plans, with its span checks, its wall bracing and a priced materials list of about $4,468. In the designer you can change it to any size from 4x4 to 16x24 ft, free.

It depends on where you live. At 120 sq ft a 10x12 sits right at the limit many towns still use, and the model code exempts sheds up to 200 sq ft only where your town adopted that number. Setbacks, height limits and HOA rules can apply either way: ask your building department before you buy lumber. The planner shows where your design falls against both numbers.

For a storage shed on a level yard, a compacted gravel pad with treated skids or deck blocks is the usual choice, and it is what the planner draws. The 8x10 sits on 3 treated 4x6 skids over about 2.0 cu yd of stone. The planner sizes the pad by rule of thumb and does not check your soil or frost depth.

It depends on the size and the store. With the prices the planner reads, the 8x4 lean-to comes to about $2,381 in materials and the 16x24 gable to about $8,145. Every design in the planner shows its own list, line by line, with the date the prices were read.

The free designer gives you the design, every check with its source, the materials list with prices and a summary PDF. The $35 builder's plan (CA$49 in Canada) adds the drawings you build from: 74 Letter sheets for the 8x10 gable, with every wall framed stud by stud, every cut placed on a store board, a full-size rafter template and the build in order. One payment, no account, and a 30-day guarantee.

A finished board-and-batten gable shed with double doors and a lamp, in a backyard at sunset
Illustration

Ready when you are

Your backyard deserves a shed that fits.

Change the size, the roof, the doors and the windows. The span checks, the wall bracing and the materials list follow every change. Free, no account.

Designing
Free
Builder's plan
$35 once
Account
Not needed

CA$49 in Canada. 30-day plan error guarantee.

Shed plans sample sheet