Shed designer
Free: the 3D model, the planner checks, the cost and the materials list update as you design. design, checks and cost Optional: the $35 builder's plan for the shed you finish.
Size
Size and walls.
8' x 10', walls 7' 4-3/4"
The width is the front wall, the one with the door. On a gable shed the ridge runs front to back.
A covered porch at the door: the roof and ridge run on over posts and beams, with a deck on the skids or blocks if you want one.
16 in suits any APA Rated Siding. 24 in needs siding stamped 24 oc and a sheltered, normal-wind site.
2x4 is plenty for a storage shed. Choose 2x6 if you will insulate deeply or hang heavy shelving.
Working in it? Add insulation, a lining, outlets and lights to the list, and larger windows.
Start from another size
Roof
Roof.
Gable, 6/12, shingles, 6 in eaves
Doors
Doors and windows.
1 door (48"), 1 window
Pick one to edit it here, or click a wall in the drawing to place one exactly.
At the prices we read, building the doors from the plan is the cheaper choice for this design: a pre-hung unit leaves 1 more line unpriced.
Site
Foundation and site.
Skids, 30 psf snow, joists 16 in apart
Treated 3/4 in tongue-and-groove floor panels, the floor quality prebuilt sheds use: they shrug off a wet mower and the damp under the floor.
The ground snow load your building department gives for your address, not a roof snow load. The checks put the whole load on the roof.
Cost
Materials and cost.
$3,498.44 in materials, before tax
- Size
- 8' x 10'
- Floor
- 80 sq ft
- Peak
- 10' 9-5/8"
- Materials est.
- $3,498.44
Drag to turn the shed · Pinch or scroll to zoom · Drag a handle to resize · Click a wall to add a door or window
Free and paid
Design it free. Build it from the $35 plan.
Free
In the designer above, no account
- The 3D and top views, with every door and window
- Every planner check with its rule and source, and a fix for each problem
- The cost estimate and the full materials list
- A summary PDF and a share link that reopens your design
One-time payment
Full builder's plan $35
Pay securely with Stripe. Download your custom plan immediately after payment. We'll also email you a link to it.
If our plan has an error, we fix it or refund you. Tell us within 30 days what is wrong and where; we send a corrected plan, and refund you if we cannot fix it. No refunds for a change of mind. Terms
- A framing drawing of every wall, with each stud dimensioned
- The cut list, with every cut assigned to a board
- Rafter angles and a full-size rafter template
- Dimensioned elevations, a building section and enlarged connection details
- A step-by-step build with figures
- One PDF on Letter paper, about 55 to 75 pages depending on your design
Free: 2 watermarked sheets of your own plan. No payment, no email.
Free
Summary PDF
The size, the heights, the doors and windows, the span checks and the full materials list, ready to print or take to the lumber yard.
How it works
Four moves, one shed.
Everything on the drawing is the engine's own output: the same numbers go into the checks, the cost, the summary PDF and the $35 plan.
Drag it to size
Pull the handles to set the width, the depth and the wall height, or type the sizes. The shed redraws as you go and stops at the sizes the framing can carry.
Place doors and windows
Click a wall to add a door or window, slide it along the wall with its handle, pick its size or move it to another wall. Each opening keeps the room its king and jack studs need.
Read the checks
Rafter, joist and header sizes are checked in bending and deflection with the lowest No. 2 design values of spruce-pine-fir, Douglas fir-larch, hem-fir and Southern pine (AWC) at the ground snow load you pick. Each problem comes with a fix you can undo.
Price it
The materials list packs every piece onto 8, 10, 12 and 16 ft boards and precut studs, and counts the sheets, roofing, nails and hardware in the units stores sell, priced at named stores.
Reading the drawing
- Width
- The front wall, the one with the door.
- Depth
- Front to back. On a gable shed the ridge runs this way, so the front and back are the gable ends and the rafters sit on the side walls.
- Lean-to
- The front wall is the tall one and the roof slopes to the back, so doors go on the front, where there is head room.
- Ground snow load
- The figure your building department gives for your address, in psf. It sets the rafter and header sizes.
Keyboard
- Ctrl+Z, Ctrl+Shift+Z
- Undo and redo
- Tab to a handle, then arrows
- Resize: 6 in a step for width and depth, 1 in for the wall height
- Pick a door or window, then arrows on its handle
- Slide it along the wall, 1 in a step
- Delete
- Remove the selected door or window
- Esc
- Close a popover
What it does not know
Your soil, your wind exposure, your frost depth and your local amendments to the code. Use the design to price and cut the job, and check it against what your building department requires.
The permit guide covers what to ask, and the free shed plans cover the common sizes.