Skip to content
Free plans

Shed designer

Free: the 3D model, the planner checks, the cost and the materials list update as you design. design, checks and cost Optional: the $35 builder's plan for the shed you finish.

8' x 10' gable shed · Design TSP-4JF0-0FXH · Plan rev. 16
Free to design · PDF plan $35

Size

Size and walls.

8' x 10', walls 7' 4-3/4"

Width
Depth
Wall height

The width is the front wall, the one with the door. On a gable shed the ridge runs front to back.

Front porch

A covered porch at the door: the roof and ridge run on over posts and beams, with a deck on the skids or blocks if you want one.

Studs

16 in suits any APA Rated Siding. 24 in needs siding stamped 24 oc and a sheltered, normal-wind site.

2x4 is plenty for a storage shed. Choose 2x6 if you will insulate deeply or hang heavy shelving.

Finished interior

Working in it? Add insulation, a lining, outlets and lights to the list, and larger windows.

Start from another size
8'10'
Size
8' x 10'
Floor
80 sq ft
Peak
10' 9-5/8"
Materials est.
$3,498.44

Drag to turn the shed · Pinch or scroll to zoom · Drag a handle to resize · Click a wall to add a door or window

100%
8' x 10', materials$3,498.44

Free and paid

Design it free. Build it from the $35 plan.

Free

In the designer above, no account

  • The 3D and top views, with every door and window
  • Every planner check with its rule and source, and a fix for each problem
  • The cost estimate and the full materials list
  • A summary PDF and a share link that reopens your design

One-time payment

Full builder's plan $35

Pay securely with Stripe. Download your custom plan immediately after payment. We'll also email you a link to it.

If our plan has an error, we fix it or refund you. Tell us within 30 days what is wrong and where; we send a corrected plan, and refund you if we cannot fix it. No refunds for a change of mind. Terms

  • A framing drawing of every wall, with each stud dimensioned
  • The cut list, with every cut assigned to a board
  • Rafter angles and a full-size rafter template
  • Dimensioned elevations, a building section and enlarged connection details
  • A step-by-step build with figures
  • One PDF on Letter paper, about 55 to 75 pages depending on your design

Free: 2 watermarked sheets of your own plan. No payment, no email.

Free

Summary PDF

The size, the heights, the doors and windows, the span checks and the full materials list, ready to print or take to the lumber yard.

How it works

Four moves, one shed.

Everything on the drawing is the engine's own output: the same numbers go into the checks, the cost, the summary PDF and the $35 plan.

  1. Drag it to size

    Pull the handles to set the width, the depth and the wall height, or type the sizes. The shed redraws as you go and stops at the sizes the framing can carry.

  2. Place doors and windows

    Click a wall to add a door or window, slide it along the wall with its handle, pick its size or move it to another wall. Each opening keeps the room its king and jack studs need.

  3. Read the checks

    Rafter, joist and header sizes are checked in bending and deflection with the lowest No. 2 design values of spruce-pine-fir, Douglas fir-larch, hem-fir and Southern pine (AWC) at the ground snow load you pick. Each problem comes with a fix you can undo.

  4. Price it

    The materials list packs every piece onto 8, 10, 12 and 16 ft boards and precut studs, and counts the sheets, roofing, nails and hardware in the units stores sell, priced at named stores.

Reading the drawing

Width
The front wall, the one with the door.
Depth
Front to back. On a gable shed the ridge runs this way, so the front and back are the gable ends and the rafters sit on the side walls.
Lean-to
The front wall is the tall one and the roof slopes to the back, so doors go on the front, where there is head room.
Ground snow load
The figure your building department gives for your address, in psf. It sets the rafter and header sizes.

Keyboard

Ctrl+Z, Ctrl+Shift+Z
Undo and redo
Tab to a handle, then arrows
Resize: 6 in a step for width and depth, 1 in for the wall height
Pick a door or window, then arrows on its handle
Slide it along the wall, 1 in a step
Delete
Remove the selected door or window
Esc
Close a popover

What it does not know

Your soil, your wind exposure, your frost depth and your local amendments to the code. Use the design to price and cut the job, and check it against what your building department requires.

The permit guide covers what to ask, and the free shed plans cover the common sizes.