Skip to content
Design free

Lumber Calculator

Board Foot Calculator

Enter up to three boards by thickness, width, length and count. The calculator gives the board feet, the total with your waste, the linear feet, the wood in the dressed boards and the cost at your price per board foot.

By The Shed PlannerUpdated 6 min readChecked against 1 sources

Board foot calculator use: a 2x4, a 2x6 and a rough hardwood board measured with a tape for thickness, width and lengthIllustration

The short answer

A board foot is 144 cubic inches, a board 1 in thick, 12 in wide and 1 ft long. Multiply thickness by width in inches and length in feet, then divide by 12: a 2x4 that is 8 ft long is 2 x 4 x 8 / 12 = 5.33 board feet.

A board foot calculator turns the size of each board into the unit that lumber yards and hardwood dealers sell by. Enter the thickness and width in inches, the length in feet and how many pieces, and the calculator below does the arithmetic, adds your waste and prices it if you type a price per board foot.

Calculator

Board foot calculator

Enter each board as thickness and width in inches, length in feet, and how many. For dimensional lumber, type the nominal size on the tag (2 x 4, not 1-1/2 x 3-1/2): that is how yards count board feet. For hardwood in quarters, 4/4 is 1 in, 5/4 is 1.25, 8/4 is 2.

Board 1
Board 2
Board 3
length 8 ftwidth 4 in2 in

Board feet

5.33
With 10% extra
5.87
Linear feet
8
Pieces
1
Wood in the dressed boards
3.5 bd ft
Cost, with the extra
Enter a price

2 x 4 x 8 / 12 = 5.33 board feet.

Get every board for a shed counted in the shed designer

One board foot is 144 cubic inches: a board 1 in thick, 12 in wide and 12 in long. Board feet = thickness (in) x width (in) x length (ft) / 12, or x length (in) / 144. Dressed sizes are the PS 20 softwood sizes (a 2x4 is 1-1/2 x 3-1/2 in), shown only when every line is a standard nominal size.

The Board Foot Formula

One board foot is 144 cubic inches of wood. Picture a board 1 in thick, 12 in wide and 12 in long, then count how many of those your board holds.

  • Board feet = thickness (in) x width (in) x length (ft) / 12
  • Board feet = thickness (in) x width (in) x length (in) / 144

Both give the same answer. Use the first when the length is on the tag in feet, the way framing lumber is sold, and the second when you measured a board with a tape in inches.

Worked examples

Board Arithmetic Board feet
2x4, 8 ft 2 x 4 x 8 / 12 5.33
2x6, 16 ft 2 x 6 x 16 / 12 16
2x10, 8 ft 2 x 10 x 8 / 12 13.33
4/4 hardwood, 6 in wide, 8 ft 1 x 6 x 8 / 12 4
8/4 hardwood, 8 in wide, 10 ft 2 x 8 x 10 / 12 13.33

Multiply by the number of pieces for the total. Ten 2x4s at 8 ft are 53.33 board feet.

Nominal or Actual Size

This is where most board foot answers go wrong. A 2x4 is not 2 in by 4 in. Softwood lumber is named for its size before drying and planing, and the dressed board is smaller: a 2x4 is 1-1/2 x 3-1/2 in, a 2x6 is 1-1/2 x 5-1/2 in, and from a 2x8 up the width is 3/4 in under the name (Southern Pine1 Inspection Bureau, citing PS 20).

Yards that sell framing by the board foot count it on the nominal size, so enter the name on the tag. The calculator also shows the wood actually in the dressed boards when every line is a standard size. For a 2x4 at 8 ft that is 3.5 board feet against 5.33 on the tag, about a third less. That gap is why a price per board foot on framing looks low next to hardwood.

Hardwood works the other way. It is sold rough, by thickness in quarters of an inch: 4/4 is 1 in, 5/4 is 1-1/4 in, 6/4 is 1-1/2 in and 8/4 is 2 in. Enter the quarter thickness and the width you measure on each board, since rough boards come in random widths.

Price per Board Foot for Shed Lumber

To compare prices across sizes, divide the shelf price by the board feet. These are the framing sizes a shed uses, at the store prices the shed cost calculator reads.

BoardBoard feetShelf pricePer board foot
2x4 x 8 ft5.33$4.35$0.82
2x4 x 16 ft10.67$12.47$1.17
2x6 x 8 ft8$9.97$1.25
2x6 x 16 ft16$19.96$1.25
2x8 x 8 ft10.67$11.12$1.04
2x10 x 8 ft13.33$12.96$0.97
2x6 PT x 8 ft8$10.78$1.35
4x4 PT x 8 ft10.67$11.78$1.10

Shelf prices: Home Depot, Bronx Terminal store, Sep 30, 2026; Home Depot, Hamilton Mill store (ZIP 30011), Oct 13, 2026, one piece, before sales tax and delivery. Board feet on the nominal size, the way yards count them. Prices change by store and by day.

Longer boards often cost more per board foot, because straight 16 ft stock is scarcer than 8 ft. Treated lumber costs more than untreated of the same size. Type any of these into the price field above to price your own list.

Board Feet in a Whole Shed

A shed is mostly 2x4s and 2x6s, so it adds up faster than you think. These are the board feet on the shed designer’s shopping list for six of its plans, every board counted on its nominal size.

PlanBoardsBoard feetTreatedPer sq ft of floor
6x8 gable8051410810.7
8x10 gable1016981688.7
10x12 gable1188752207.3
12x16 gable1461,1633346.1
16x20 gable1941,7676005.5
10x8 lean-to825781507.2

Every board on the shed designer's shopping list for the plan as drawn: the treated floor frame and skids, studs, plates, rafters, ridge, headers, ties and the 1x trim, counted on the nominal size of the board bought. Sheets, siding and roofing are not lumber and are left out.

Small sheds use the most per square foot, because four walls and a roof wrap little floor: over 10 board feet on the 6x8, about 5.5 on the 16x20. A fifth to a third of it is the pressure-treated floor frame and skids. The 2x4s, mostly studs and plates, are the biggest line, which is why the stud calculator is the next tool to open. For the full list with every cut, see the shed material list, and for the dollar total, the shed cost calculator.

Waste, and When Board Feet Do Not Help

Add 10 to 15% for hardwood, more for rough boards with checks and knots you will cut out. Framing lumber is different: you buy whole boards, so waste is a question of which lengths you buy, not a percentage. The shed designer packs every cut onto 8, 10, 12 and 16 ft boards and lists the boards to buy, so you never pay for board feet you cannot use.

Check before you cut

Before you order

Ask the yard how it tallies. Most count framing on the nominal size and hardwood on the rough size, but some round each board up to the next foot of length or the next inch of width. A few board feet per piece adds up over a whole order.

Sources

Every number in this guide that does not come from our own shed designer was checked against these 1 documents, numbered in the order the text first cites them and read on Sep 29, 2026. 1 is a code, agency, maker or store.

  1. 1Southern Pine Inspection BureauNominal Vs Actual Lumber Sizes

Questions

Anything else? Write to us or browse every guide.

Questions people ask

5.33 board feet on the nominal size: 2 x 4 x 8 / 12. The board you carry home is 1-1/2 x 3-1/2 in, which is 3.5 board feet of wood, but yards that sell by the board foot count dimensional lumber on the nominal size on the tag.

Use the size the seller counts. Softwood framing lumber is counted on the nominal size, so a 2x6 is entered as 2 by 6. Rough hardwood is sold by its rough thickness in quarters, so 4/4 is 1 in and 8/4 is 2 in, and the width is measured on each board.

A linear foot is only length. A board foot is volume. A 2x4 and a 2x12 that are both 8 ft long are 8 linear feet each, but 5.33 and 16 board feet. Framing is usually bought by the piece or the linear foot, hardwood by the board foot.

Divide the price of the piece by its board feet. A 2x10 that is 8 ft long is 13.33 board feet, so at $12.96 it costs $0.97 per board foot. The price table on this page does that for the framing sizes a shed uses.

On the shed designer's plans, an 8x10 gable shed takes about 698 board feet in 101 boards and a 12x16 gable about 1,163 board feet in 146 boards, the treated floor frame and the trim included. Per square foot of floor, small sheds take the most: about 8.7 board feet on the 8x10 and 6.1 on the 12x16.

Design it, then build it

Your backyard deserves a shed that fits.

Change the size, the roof, the doors and the windows. The span checks, the wall bracing and the materials list follow every change. Free, no account.

Design my shed, free
Designing
Free
Builder's plan
$35 once
Account
Not needed
A finished board-and-batten gable shed with double doors at sunsetIllustration