The short answer
A two story shed needs a second floor you can stand on, and that means an eave about 12 ft high, a floor sized for 40 psf of live load and a stair 36 inches wide. At that point it is a small post-frame barn, not a stud-framed shed, and it falls outside the 200 sq ft one-story permit exemption.
A two story shed is a building with a second floor you can walk on. Once you build one, you are no longer building a shed. You are building a small barn, and the plan has to answer questions a shed never asks: how high the walls are, what the upper floor carries, how you climb to it and which permit path you are on.
Our shed designer does not draw a second floor. It draws one-story sheds up to 16 ft wide, and it has no loft or upper floor at all. If you only want more storage, read the shed loft guide. If you want a floor you can stand on, this page tells you what that takes and where to design it.
Why a real second floor is a different building
The word “shed” covers a small, low, one-story box. A second floor changes the height, the floor load, the stair and the permit, and each of those changes the cost.
Height
A person standing upstairs needs head room above the upper floor, and the floor itself needs a joist or truss depth under it. In the post-frame barn planner’s rules, the upper floor sits at least 96 inches above the ground floor and at least 48 inches below the eave, so the eave is at least 144 inches, or 12 ft. The roof sits on top of that. A 16x24 gable shed with a normal wall is far shorter than this, and the designer stops at a 120 inch wall.
Floor load
An upper floor that holds people and stored goods is designed for much more than a shelf. The barn planner designs it for 40 psf of live load over the whole floor and adds 10 psf of dead load, for living space and for storage alike. That is the figure from the model residential code table the planner cites (IRC1 2021 Table R301.5). A heavy shop or warehouse floor is not drawn there at all.
The stair
A second floor needs a way up, and a ladder is not it. The barn planner draws a stair that follows the IRC1 2021 R311.7 rules it cites: at least 36 inches clear, risers no taller than 7-3/4 inches, treads at least 10 inches deep, and a landing at the top and the bottom at least 36 inches deep. That stair takes real floor area on both levels, and it cuts an opening in the upper floor that has to be framed. Plan the stair first, because it decides how much of the footprint is left.
The permit
The model code exempts one-story detached accessory structures up to 200 sq ft from a building permit (IRC1 2021 R105.2, International Code Council). Two stories is not one story, so the exemption does not cover it. The exemption also never lets you ignore the rest of the code. Check with your local building department, and read our shed permits guide for how the 200 sq ft test works on a one-story shed.
- 1International Code Council 2021 International Residential Code, Chapter 1: Scope and Administration
Loft or second floor: which do you need?
Ask what you will do up there. The answer picks the building.
When a loft is enough
If you want to store long lumber, seasonal bins or camping gear, a loft in a shed does the job. It is a platform of joists and plywood under the roof, on a shed up to 16 ft wide. Head room under a gable roof is small, so you reach in and place things, you do not stand. The shed loft guide covers head room, joist spans and access. See shed sizes to pick a footprint before you add a loft to it.
When you need a second floor
Choose a second floor when you must stand and work upstairs: a studio over a workshop, a hobby space, a guest room or a hay and tool loft you walk into. You are choosing a floor, a stair and taller walls, and you are also choosing a building that is no longer a one-story accessory structure.
The 16 ft question
The designer’s limit is 16 ft wide. A second floor spanning a wide room needs deeper joists or floor trusses, and the more it spans, the more posts and beams it needs below. If your plan is wider than a shed can be, that is a sign you are in barn territory already.
What a second floor needs
Every item in this list is a line item a shed never carries.
The floor system
The barn planner sizes the upper floor with joists from the IRC1 span table, and with floor trusses where the span passes that table. It adds as many beam lines down the building as the joists need, up to three. It can also use floor trusses with fewer interior posts when you want an open ground floor. Each choice trades cost for open floor below.
The posts
The posts under the upper floor carry the floor load as well as the roof. The barn planner checks them for the floor live load plus dead load, alone and combined with snow and with wind. The posts carry the load down, so the footings under them are bigger than a shed’s skids or a gravel pad. This is why a two story shed is not a scaled up garden shed.
Wall height limits
In the barn planner, walls from 16 to 20 ft that carry a second floor come with a review note, and walls from 20 to 22 ft come with a note that an engineered design is needed. That keeps a small two story building in a range where standard methods apply and tells you when to bring in an engineer. Your own jurisdiction can set a lower bar.
- 1International Code Council 2021 International Residential Code, Chapter 1: Scope and Administration
It is post-frame with steel, not a stud shed
A stud-framed shed has 2x4 walls on a floor frame. The building the barn planner draws is a post-frame (pole barn) building: tall posts, girts across them, a steel roof and steel siding, and trusses on top. The upper floor is framed between the posts.
This matters for your plan. You do not stack a floor on 2x4 stud walls and call it done. You cannot take a lean-to or a gable shed plan and add a story. The structure underneath is different.
Design it free
The barn planner designs a two story post-frame building from your own size: width from 12 ft, an eave from 8 ft to 16 ft (up to 22 ft with a second floor), and a second floor with its own stair. It is the free tool for this job.
- Open the two story pole barn plans page and the barn designer from it.
- Start at the width and length you want, turn on the second floor, and raise the eave until the floor and stair checks pass.
- Look at the stair check and the floor check in the plan before you trust the size.
We ran the barn planner at 12x16 and 12x20 with a storage floor, in October 2026. With its default doors, neither passed as drawn. The stair and its landings alone need 192 in of wall at a 96 in floor height and 222 in at 120 in, so a 16 ft long building has nothing to spare, and the doors on the ground floor then have to fit under the upper floor. Treat 12 ft wide as the floor of the range, not a size that works on its own, and check your own size in the designer.
If you only need storage up high
Most people searching for a two story shed want space, not a second floor. If that is you, a loft in a one-story shed is a far smaller job, and a one-story shed under 200 sq ft can fall under the model code’s permit exemption.
- Pick the width that fits your joists. See the span tables in the shed loft guide.
- Draw the shed in the shed designer and note the wall and ridge heights it gives you.
- Buy joists, plywood and a sturdy ladder or fixed steps.
- Ask your building department whether a loft counts as extra floor area where you live.
Buy exterior-grade plywood and joist hangers or a ledger rated for the load, from the lumber aisle of your home center.
Check before you cut
Check first
The designer does not draw a loft or a second floor, and our one-story plans do not include one. Any loft or upper floor you add to a shed plan is your own addition, so ask your building department what it needs.
Sources
Every number in this guide that does not come from our own shed designer was checked against these 1 documents, numbered in the order the text first cites them and read on Sep 29, 2026. 1 is a code, agency, maker or store.
- 1International Code Council2021 International Residential Code, Chapter 1: Scope and Administration


