Skip to content
Customize

2 free starting designs

Shed with porch plans

2 free plans for a shed with a covered front porch under the same roof: a 10x12 with a 4' porch and a 12x16 with a 6' porch, with the posts, the beam and the deck worked out.

A gable shed with a covered front porch, two chairs on the deck beside the open doorIllustration
Plans
2
Floor
120 to 192 sq ft
Materials
$4,858 to $6,317
Planner checks
All pass at 30 psf

Every size, drawn by the designer

Pick a porch size.

Each one is a full starting plan: framed, checked at 30 psf of snow and priced. Switch the view to see the frame or the dimensions.

The 12x16 gable shed plans, drawn by the shed designerThe framing of the 12x16 gable shed plans, drawn by the shed designerEvery dimension of the 12x16 gable shed plans, drawn by the shed designerDrawn by the designer from this plan

12x16

12x16 gable shed

A 12x16 gable shed with a 6 ft covered porch: the roof, ridge and skids run on over a deck at the door, carried on four posts and two beams.

Floor
192 sq ft
Roof
6/12 gable
Walls
7' 4-3/4"
Overall height
11' 9-5/8"
Door
48" double
Rafters
26 2x6 at 16"
Porch
Front porch 6' deep: 4 4x4 posts 7' 5-1/2" tall (IRC Table R507.4, a deck post table read in compression only, allows 14' for 20 sq ft of roof each at 30 psf; not verified for wind, ask your building department), two beams of 2-2x6 plies spanning 5' 7", 4 knee braces, and a 5/4x6 deck on 2x6 joists 16" apart over the skids, which run on under the porch.

15 of 15 planner checks passed

Materials about $6,317, before tax and delivery

Side by side

The 2 porch plans compared.

PlanRoofFloorWallsHeightDoorRaftersBoardsMaterialsChecks
The 10x12 gable shed, drawn by the shed designer10x1210x12 gable shedGable120 sq ft7' 4-3/4"11' 3-5/8"48" double20 2x6 at 16"150$4,85815 of 15
The 12x16 gable shed, drawn by the shed designer12x1612x16 gable shedGable192 sq ft7' 4-3/4"11' 9-5/8"48" double26 2x6 at 16"210$6,31715 of 15

Each row is the starting plan as drawn, at 30 psf of snow. Materials are the shed itself, before the gravel pad, tax and delivery.

How to choose

Choosing a shed with porch plan.

Start with the porch, since it is the reason for the plan: how deep it needs to be, what stands on it, and what the posts and the roof have to carry. Furniture and plants vary, so measure your own; the charts give each plan's side of the comparison.

  1. 01Porch depth

    Pick the depth from what you will put on it.

    The designer offers a porch 3, 4 or 6 ft deep, and the two plans here use 4' and 6'. Set the chair, the bench or the planter you want on the driveway the way it would stand, measure the rectangle around it, and add a path to the door. That rectangle is what the porch has to hold.

    The chart compares the porch depth on each plan before any furniture goes on it.

  2. 02One roof

    The roof carries on over the deck.

    On both plans the roof, the ridge and the skids run on past the front wall, so the porch sits under the same rafters as the shed. The 10x12 keeps a 6/12 gable over a 4' porch; the 12x16 carries its ridge 6' further out.

    The roof pitch and the siding follow the rest of the shed. The roof pitch guide covers the choices for the slope. Only want the doors out of the rain? Wider eaves may do: see the shed with overhang plans.

  3. 03Posts and beam

    The designer sizes them, then checks them.

    Each plan stands its roof edge on 4 posts and a beam. On the 10x12 the posts are 4x4 and about 7' 5-1/2" tall; on the 12x16 they are 4x4 and 7' 5-1/2" tall, carried by two beams of 2-2x6 plies.

    The designer picks the post size from IRC Table R507.4, the deck post table, using the roof area each post carries and the snow load you set. More snow means each post is allowed less height, and above 70 psf the table stops: the designer then uses 6x6 posts and tells you to have them checked by your building department or an engineer. It also checks the beam span and blocks a plan whose porch is too deep for its posts or beam.

  4. 04Deck and railing

    Both are options you can turn on or off.

    Both plans come with a deck: 5/4x6 boards on 2x6 joists 16" apart over the skids, which run on under the porch. Turn the deck off and the skids under the posts still run on under the porch. A railing needs the deck, so it is a second switch.

    Open the 12x16 with the railing on to see the guard added to the shopping list, and change the porch depth, the snow load or the door from there.

  5. 05Permit

    A porch adds covered area.

    A shed with a porch covers more ground than the shed alone, and many towns measure the roofed area. Whether the porch counts toward your town's size limit, and whether a porch with posts changes which permit applies, is up to your town: check with your local building department before you buy lumber.

    The shed permits guide lists what to ask.

What they cost

$4,858 to $6,317 in materials.

Each plan's shopping list, priced line by line, before sales tax, delivery and tools. The porch posts, beam, deck boards, post caps and post bases are priced like every other line. The lowest here is the 10x12 at $4,858.

Lowest
$4,858, 10x12
Highest
$6,317, 12x16
Per sq ft of floor
$32.90 to $40.49
Plans fully priced
2 of 2

Excluded: tax, delivery, labor, permits, tools

The cost to build a shed page breaks it down by group, and the shed cost calculator takes your own store's prices.

Shed materials for each porch plan

  • 10x12$4,858+ $252 gravel pad
  • 12x16$6,317+ $392 gravel pad

The $35 builder's plan

Free to plan. $35 to build from.

Every plan above is free to open, check and price. The builder's plan is drawn from the shed you finish, for one payment. These are real sheets from the 74-sheet plan for the 8x10 gable shed.

Free

  • The design in 3D, and every change you make to it
  • Every planner check, with its rule and its source
  • The materials list priced line by line
  • A summary PDF of the design and its checks

$35 once

  • Every wall framed, each stud dimensioned from the corner
  • The cut list, every cut assigned to a store board
  • Rafter angles and a full-size rafter template: cut to this
  • Elevations, a building section and the connection details
  • The shopping list with store prices and the build, step by step
Customize the 12x16, free

You check out in the designer, with your design loaded. If the plan has an error, we fix it or refund you within 30 days. Guarantee terms.

Real sheets from the 74-sheet sample plan for the 8x10 gable shed

  • Sample sheet 24 of 74 from the shed plan: wall framing

    24Wall framing

  • Sample sheet 16 of 74 from the shed plan: cutting plan

    16Cutting plan

  • Sample sheet 58 of 74 from the shed plan: build steps

    58Build steps

  • Sample sheet 6 of 74 from the shed plan: shopping list

    06Shopping list

Shed plans sample sheet

Questions

Anything else? Write to us or read the questions about all plans.

Questions about porch shed plans

Deep enough for what you put on it. The designer offers 3, 4 and 6 ft; the 10x12 plan uses 4', enough for a chair or two beside the door, and the 12x16 uses 6', enough for a bench and a planter with a path through. A deeper porch also makes longer beams and taller posts, which the designer checks.

Often, but it is a different job from these plans, which frame the porch with the shed. A shed built with its roof in mind is simpler than one added to. The lean-to on a shed guide covers adding a roof to an existing shed.

It can. Many towns measure the roofed area, and a porch is roofed. It varies by town, so check with your local building department; the shed permits guide lists what to ask.

Yes, the summary. Each plan on this page has a free summary PDF made in your browser, with the design, its checks and its materials list. The 12x16 comes to 210 boards. The $35 builder's plan adds the dimensioned drawings for your own design and every cut.

Other ways to browse

Not quite the shed you picture?

A finished wood gable shed with double doors in a backyard at golden hourIllustration

Your shed, your numbers

Start from the 12x16. Make it yours.

Change the size, the roof, the doors and the windows. The span checks, the wall bracing and the materials list follow every change. Free, no account.

Designing
Free
Builder's plan
$35 once
Account
Not needed