Skip to content
Customize

2 free starting designs

Trash can shed plans

2 free walk-in lean-to plans for wheeled trash and recycling carts, the 8x4 and the 8x6, built against a fence or the side of the garage. These are sheds you step into, with the carts inside and room left for tools. If you want a 4 ft enclosure with a lift lid, this designer does not draw it.

A walk-in wooden lean-to shed beside a garage with its door open on wheeled trash cartsIllustration
Plans
2
Floor
32 to 48 sq ft
Materials
$2,381 to $2,669
Planner checks
All pass at 30 psf

Every size, drawn by the designer

Pick a trash can size.

Each one is a full starting plan: framed, checked at 30 psf of snow and priced. Switch the view to see the frame or the dimensions.

The 8x4 lean-to shed plans, drawn by the shed designerThe framing of the 8x4 lean-to shed plans, drawn by the shed designerEvery dimension of the 8x4 lean-to shed plans, drawn by the shed designerDrawn by the designer from this plan

8x4

8x4 lean-to shed

A shallow lean-to for garden tools and bins along a fence or the back of a garage.

Floor
32 sq ft
Roof
3/12 lean-to
Front wall
8' 1-1/8"
Back wall
7' 2"
Door
34"
Rafters
7 2x6 at 16"

10 of 10 planner checks passed

Materials at least $2,381, before tax and delivery

Side by side

The 2 trash can plans compared.

PlanRoofFloorWallsHeightDoorRaftersBoardsMaterialsChecks
The 8x4 lean-to shed, drawn by the shed designer8x48x4 lean-to shedLean-to32 sq ft8' 1-1/8" to 7' 2"9' 8-1/2"34"7 2x6 at 16"56from $2,38110 of 10
The 8x6 lean-to shed, drawn by the shed designer8x68x6 lean-to shedLean-to48 sq ft8' 1-1/8" to 6' 8"9' 8-1/2"34"7 2x6 at 16"69from $2,66910 of 10

Each row is the starting plan as drawn, at 30 psf of snow. Materials are the shed itself, before the gravel pad, tax and delivery.

How to choose

Fit the carts, then the door.

Measure your own carts first. The charts show the clear floor inside the studs and the door on each plan, so you can hold your numbers against them.

  1. 01Measure your carts

    Your carts, not a catalog size.

    Carts differ by city and by maker, so measure the ones the truck empties: width across the body, depth from the back to the front of the lid, and height with the lid shut. Cascade Engineering lists its 96-gallon carts at 24.8 to 26 in wide, 31 to 34.4 in deep and about 46 in tall, a range to check your own against, not a size to build to.

    Hold your numbers against the clear floor in the chart: the outside size less 3-1/2" of wall on every side. Multiply your cart width by three and compare it with the inside width of the 8x4. Leave a few inches behind the carts for the lids to swing and your hands to reach the handles.

    If three carts do not fit in a row, or you want a tool wall beside them, step up to the 8x6 plan, which is deeper.

    • 8x47' 5" x 3' 5"
    • 8x67' 5" x 5' 5"
  2. 02The door

    Wheels set the door width.

    Both plans come with a 34" door. A cart goes through on its two wheels, so measure its widest point plus your hands on the handle. If you need more, widen the door in the designer: open a 10x6 lean-to with a 48 in door. The wall bracing check then tells you whether enough solid wall is left beside the opening, and blocks the plan if there is not.

    The door sits in the tall front wall, 8' 1-1/8" on the 8x4, so a cart with its lid shut clears the header. Keep the threshold flat or add a short ramp so loaded carts roll out without a bump: the shed ramp guide shows how.

  3. 03Smell and air

    Carts in a shed need air.

    Wet bags and rinsed bins smell in a shut box. Plan vents high and low so air moves through the shed, and keep the cart lids closed. The shed ventilation guide covers vent types and placement.

  4. 04Where it goes

    Against a fence or the garage.

    A lean-to backs onto a fence line or the side of the garage, with the low back wall toward the fence and the door facing the way the carts roll to the curb. Both plans are free-standing, on their own skids. The lean-to shed guide covers siting, and the shed permits guide covers setbacks from the property line.

    Set the shed on a level gravel base so carts roll in and out without climbing a lip. For a narrower strip beside the house, see the side of house shed plans.

What they cost

$2,381 to $2,669 in materials.

Each plan's shopping list, priced line by line, before sales tax, delivery and tools. The lowest here is the 8x4 at $2,381. Add a door latch with a hasp that locks and a spring hinge so the door closes behind you.

Lowest
$2,381, 8x4
Highest
$2,669, 8x6
Per sq ft of floor
$55.60 to $74.42
Plans fully priced
0 of 2

Excluded: tax, delivery, labor, permits, tools

The cost to build a shed page breaks it down by group, and the shed cost calculator takes your own store's prices.

Shed materials for each trash can plan

  • 8x4from $2,381+ $70 gravel pad
  • 8x6from $2,669+ $98 gravel pad

The $35 builder's plan

Free to plan. $35 to build from.

Every plan above is free to open, check and price. The builder's plan is drawn from the shed you finish, for one payment. These are real sheets from the 74-sheet plan for the 8x10 gable shed.

Free

  • The design in 3D, and every change you make to it
  • Every planner check, with its rule and its source
  • The materials list priced line by line
  • A summary PDF of the design and its checks

$35 once

  • Every wall framed, each stud dimensioned from the corner
  • The cut list, every cut assigned to a store board
  • Rafter angles and a full-size rafter template: cut to this
  • Elevations, a building section and the connection details
  • The shopping list with store prices and the build, step by step
Customize the 8x4, free

You check out in the designer, with your design loaded. If the plan has an error, we fix it or refund you within 30 days. Guarantee terms.

Real sheets from the 74-sheet sample plan for the 8x10 gable shed

  • Sample sheet 24 of 74 from the shed plan: wall framing

    24Wall framing

  • Sample sheet 16 of 74 from the shed plan: cutting plan

    16Cutting plan

  • Sample sheet 58 of 74 from the shed plan: build steps

    58Build steps

  • Sample sheet 6 of 74 from the shed plan: shopping list

    06Shopping list

Shed plans sample sheet

Questions

Anything else? Write to us or read the questions about all plans.

Questions about trash can shed plans

Yes. Both plans are a skid-built lean-to: a floor frame, four walls, one roof slope and a door, counted board by board. The 8x4 plan is the simplest, with one rafter cut repeated across the roof. Open the designer, change the size or door to suit your carts, and the shopping list updates with it.

Add up the widths of your three carts and compare the total with the inside width of the 8x4 in the chart above. If it is narrower, the carts stand in a row with the depth left over for the lids. If it is wider, use the 8x6 plan. Cascade Engineering lists its 96-gallon carts at 24.8 to 26 in wide, a range to check against your own.

Yes. Both plans are wood: pressure-treated skids, stud walls and a plywood and OSB shell under a 3/12 lean-to roof. They are walk-in sheds that hold the carts and tools together. If you want a 4 ft enclosure with a lift lid, this designer does not draw it.

Maybe not. At 32 sq ft the 8x4 is under the 200 sq ft that the 2021 IRC model text exempts from a building permit where a town adopts it, but towns set their own limits and setbacks. Check with your local building department, and read the shed permits guide before you build.

Other ways to browse

Not quite the shed you picture?

A finished wood gable shed with double doors in a backyard at golden hourIllustration

Your shed, your numbers

Start from the 8x4. Make it yours.

Change the size, the roof, the doors and the windows. The span checks, the wall bracing and the materials list follow every change. Free, no account.

Designing
Free
Builder's plan
$35 once
Account
Not needed