Skip to content
Customize

3 free starting designs

Generator shed plans

3 free plans to store a portable generator out of the rain: the 8x4 and 8x6 lean-tos and the 6x6 gable. These are walk-in storage sheds. A portable generator is never run inside a closed shed, and these plans do not draw a running enclosure.

A small gray lean-to shed with its door open on a portable generator on wheels and a short wooden ramp at the doorIllustration
Plans
3
Floor
32 to 48 sq ft
Materials
$2,381 to $2,669
Planner checks
All pass at 30 psf

Every size, drawn by the designer

Pick a generator size.

Each one is a full starting plan: framed, checked at 30 psf of snow and priced. Switch the view to see the frame or the dimensions.

The 8x4 lean-to shed plans, drawn by the shed designerThe framing of the 8x4 lean-to shed plans, drawn by the shed designerEvery dimension of the 8x4 lean-to shed plans, drawn by the shed designerDrawn by the designer from this plan

8x4

8x4 lean-to shed

A shallow lean-to for garden tools and bins along a fence or the back of a garage.

Floor
32 sq ft
Roof
3/12 lean-to
Front wall
8' 1-1/8"
Back wall
7' 2"
Door
34"
Rafters
7 2x6 at 16"

10 of 10 planner checks passed

Materials at least $2,381, before tax and delivery

Side by side

The 3 generator plans compared.

PlanRoofFloorWallsHeightDoorRaftersBoardsMaterialsChecks
The 8x4 lean-to shed, drawn by the shed designer8x48x4 lean-to shedLean-to32 sq ft8' 1-1/8" to 7' 2"9' 8-1/2"34"7 2x6 at 16"56from $2,38110 of 10
The 6x6 gable shed, drawn by the shed designer6x66x6 gable shedGable36 sq ft7' 4-3/4"10' 3-5/8"36"12 2x6 at 16"74$2,57510 of 10
The 8x6 lean-to shed, drawn by the shed designer8x68x6 lean-to shedLean-to48 sq ft8' 1-1/8" to 6' 8"9' 8-1/2"34"7 2x6 at 16"69from $2,66910 of 10

Each row is the starting plan as drawn, at 30 psf of snow. Materials are the shed itself, before the gravel pad, tax and delivery.

How to choose

Fit the generator, then the door.

Measure your own generator first, with its wheels and handle. The charts show the door and the clear floor inside the studs on each plan, so you can hold your numbers against them.

  1. 01Store it, run it outside

    A shed keeps the generator dry. It is not where it runs.

    The US Consumer Product Safety Commission says to never operate a portable generator inside a home, garage, basement, crawlspace or shed, and to run it outside only, at least 20 feet away from the house (CPSC news release, September 29, 2022). It also says not to run one on an outside porch or in a carport. Rolling the generator out, starting it in the open and shutting it off before you wheel it back is the habit these plans are built around.

    Some manufacturers sell enclosures made to run a specific generator model. That is a listed product from the generator's maker, so ask the maker which enclosure fits your model. This designer does not draw one.

  2. 02Measure the generator

    Width across the wheels and the handle, then the door.

    Roll the generator out on the driveway and measure the widest point, which is usually the wheel kit or the handle, plus your hands on the grip. It has to clear the door. The two lean-tos come with a 34" door and the 6x6 gable with a 36" door. If you need more, widen the door in the designer: open a 10x6 lean-to with a 48 in door. The wall bracing check then tells you whether enough solid wall is left beside the opening, and blocks the plan if there is not.

    The door goes in the tall front wall, 8' 1-1/8" on the 8x4, so a generator with its handle up clears the header. Hold your numbers against the clear floor too: the outside size less 3-1/2" of wall on every side.

  3. 03Roll it in and out

    A flat floor and a short ramp.

    Generators are heavy and sit on small wheels, so the threshold is the pinch point. Keep the sill low and add a ramp from the gravel to the door so you can push the unit out without lifting it. The shed ramp guide shows how to size one. Inside, the floor is plywood over joists on skids, so a wheeled generator rolls on a flat deck.

    • 8x47' 5" x 3' 5"
    • 6x65' 5" x 5' 5"
    • 8x67' 5" x 5' 5"
  4. 04Air and heat

    Let it cool before it goes in.

    Exhaust parts stay hot after the engine stops. Polaris, for one, tells owners not to put the storage cover on while engine components are still hot, and to wait until the generator has sufficiently cooled (Polaris Power P3200iEBT owner's manual, Hot Exhaust Systems). Your manual has its own wait, so follow it before you roll the unit in and shut the door.

    Honda tells owners to keep the generator and its fuel container in a cool, dry area (Honda Generators fuel recommendations page). A shed with vents high and low helps with that: the shed ventilation guide covers vents and placement, and the pool pump shed plans use the same idea for a pump and filter. Keep a fuel container where its maker and your local fire department say, and ask them before you store fuel next to a warm engine.

  5. 05Base

    Skids on a gravel pad.

    Every plan here sits on pressure-treated skids on a compacted gravel pad, which keeps the floor dry under a heavy machine. The gravel shed base guide gives the pad size and depth. The lean-to plans and the lean-to shed guide cover siting against a fence or the garage. Permit and setback rules depend on your town, so check with your local building department and read the shed permits guide.

  6. 06Power to the house

    Wiring a generator to the house is an electrician's job.

    Connecting a generator to a house circuit is work for a licensed electrician, and your building department will tell you what it needs. Never plug a generator into a house outlet to feed the house. The guide to running power to a shed covers the shed side of the job.

What they cost

$2,381 to $2,669 in materials.

Each plan's shopping list, priced line by line, before sales tax, delivery and tools. The lowest here is the 8x4 lean-to at $2,381. Add a fitted storage cover for the generator and a battery CO alarm for the house.

Lowest
$2,381, 8x4
Highest
$2,669, 8x6
Per sq ft of floor
$55.60 to $74.42
Plans fully priced
1 of 3

Excluded: tax, delivery, labor, permits, tools

The cost to build a shed page breaks it down by group, and the shed cost calculator takes your own store's prices.

Shed materials for each generator plan

  • 8x4from $2,381+ $70 gravel pad
  • 6x6$2,575+ $77 gravel pad
  • 8x6from $2,669+ $98 gravel pad

The $35 builder's plan

Free to plan. $35 to build from.

Every plan above is free to open, check and price. The builder's plan is drawn from the shed you finish, for one payment. These are real sheets from the 74-sheet plan for the 8x10 gable shed.

Free

  • The design in 3D, and every change you make to it
  • Every planner check, with its rule and its source
  • The materials list priced line by line
  • A summary PDF of the design and its checks

$35 once

  • Every wall framed, each stud dimensioned from the corner
  • The cut list, every cut assigned to a store board
  • Rafter angles and a full-size rafter template: cut to this
  • Elevations, a building section and the connection details
  • The shopping list with store prices and the build, step by step
Customize the 8x4, free

You check out in the designer, with your design loaded. If the plan has an error, we fix it or refund you within 30 days. Guarantee terms.

Real sheets from the 74-sheet sample plan for the 8x10 gable shed

  • Sample sheet 24 of 74 from the shed plan: wall framing

    24Wall framing

  • Sample sheet 16 of 74 from the shed plan: cutting plan

    16Cutting plan

  • Sample sheet 58 of 74 from the shed plan: build steps

    58Build steps

  • Sample sheet 6 of 74 from the shed plan: shopping list

    06Shopping list

Shed plans sample sheet

Questions

Anything else? Write to us or read the questions about all plans.

Questions about generator shed plans

No. The US Consumer Product Safety Commission says to never operate a portable generator inside a home, garage, basement, crawlspace or shed, and to run it outside only, at least 20 feet away from the house (CPSC news release, September 29, 2022). Use the shed to store it, roll it out to run it, and turn it off and let it cool before it goes back in.

Build a small walk-in shed and treat it as storage. Pick the plan, measure the generator across its wheels and handle, and match the door to it: the 8x4 lean-to has a 34" door and the 6x6 gable a 36" door. Put it on a gravel pad, add a ramp, and keep the generator's exhaust outside the building whenever it runs. Open the designer to change the size or the door.

Yes. Retailers sell metal and plastic storage boxes, and some makers sell enclosures made to run a specific generator model. A running enclosure is a listed product for that generator, so ask the generator's manufacturer which one fits, and follow the manual. Our plans are walk-in storage sheds, drawn board by board with a priced materials list.

Makers say to keep the generator and its fuel in a cool, dry area (Honda Generators fuel recommendations page). A cover is not an enclosure to run it under. For months of storage, follow your manual for the fuel: Honda, for its EU models, lists stabilizer for 1 to 2 months and draining the carburetor for 2 to 12 months. A dry shed keeps snow and rain off the unit between uses.

Every plan on this page has a free summary PDF made in your browser, with the design, its checks and its materials list. The 8x4 comes to 56 boards. The $35 builder's plan adds the dimensioned drawings for your own size and every cut.

Other ways to browse

Not quite the shed you picture?

A finished wood gable shed with double doors in a backyard at golden hourIllustration

Your shed, your numbers

Start from the 8x4. Make it yours.

Change the size, the roof, the doors and the windows. The span checks, the wall bracing and the materials list follow every change. Free, no account.

Designing
Free
Builder's plan
$35 once
Account
Not needed