2 free starting designs
Pool pump shed plans
A small lean-to that covers the pump and the filter and lets them breathe: the 8x4 gives 25 sq ft inside and the 8x6 gives 40. Both are drawn and priced by the designer, from $2,381 in materials. The pool wiring is not part of the drawing.

- Plans
- 2
- Floor
- 32 to 48 sq ft
- Materials
- $2,381 to $2,669
- Planner checks
- All pass at 30 psf
Every size, drawn by the designer
Pick a pool pump size.
Each one is a full starting plan: framed, checked at 30 psf of snow and priced. Switch the view to see the frame or the dimensions.
8x4
8x4 lean-to shed
A shallow lean-to for garden tools and bins along a fence or the back of a garage.
- Floor
- 32 sq ft
- Roof
- 3/12 lean-to
- Front wall
- 8' 1-1/8"
- Back wall
- 7' 2"
- Door
- 34"
- Rafters
- 7 2x6 at 16"
10 of 10 planner checks passed
Materials at least $2,381, before tax and delivery
Side by side
The 2 pool pump plans compared.
| Plan | Roof | Floor | Walls | Height | Door | Rafters | Boards | Materials | Checks |
|---|---|---|---|---|---|---|---|---|---|
| Lean-to | 32 sq ft | 8' 1-1/8" to 7' 2" | 9' 8-1/2" | 34" | 7 2x6 at 16" | 56 | from $2,381 | 10 of 10 | |
| Lean-to | 48 sq ft | 8' 1-1/8" to 6' 8" | 9' 8-1/2" | 34" | 7 2x6 at 16" | 69 | from $2,669 | 10 of 10 |
Each row is the starting plan as drawn, at 30 psf of snow. Materials are the shed itself, before the gravel pad, tax and delivery.
How to choose
Two sizes for the pump and the filter.
What the electrician owns, how much floor and door you get, and how much vent area to cut into the walls. Every bar is a plan, drawn by the designer. Measure your own pump and filter before you pick.
01The electrical rule
We draw the shed. The electrician owns the pool wiring.
A pool pump usually runs on its own circuit, and Article 680 of the National Electrical Code covers the wiring and the bonding of swimming pool equipment. Where the pump can sit, how it is bonded and what protects it are the electrician's calls, and the inspector's to approve. These plans draw the walls, the roof and the door only.
Ask your building department what it needs for the shed and for the circuit before you buy lumber. The shed permits guide lists what to ask, and the guide to running power to a shed covers the shed side of the trench.
04Base
Skids on a gravel pad, away from the splash.
Every plan here sits on pressure-treated skids on a compacted gravel pad, which drains better than a slab poured next to a wet deck. The shed on skids guide covers the base. Keep the shed clear of overflow and backwash, and run the pool plumbing in sleeves the plumber chooses.
For other equipment that needs air, see the generator shed plans. Both sizes are under the 200 sq ft permit line of the model code, and your town may draw its own.
What they cost
$2,381 to $2,669 in materials.
Each plan's shopping list, priced line by line, before sales tax, delivery and tools. The bar is the shed itself; the gravel pad under it is priced apart. Vents, wiring and pool plumbing are not in the total.
- Lowest
- $2,381, 8x4
- Highest
- $2,669, 8x6
- Per sq ft of floor
- $55.60 to $74.42
- Plans fully priced
- 0 of 2
Excluded: tax, delivery, labor, permits, tools
The cost to build a shed page breaks it down by group, and the shed cost calculator takes your own store's prices.
Shed materials for each pool pump plan
Shelf prices from Home Depot, Bronx Terminal store, read Sep 30, 2026. This sum mixes four stores: 1x4 exterior trim board, 16 ft is priced at Home Depot, Hamilton Mill store (ZIP 30011), Oct 20, 2026; treated subfloor panels at Menards.com, no store selected, Nov 16, 2026; house wrap (closest available) at Menards.com, no store selected, Oct 10, 2026; Z-flashing at Home Depot, Hamilton Mill store (ZIP 30011), Sep 30, 2026; header-spacer plywood, flashing tape, connector nails, H-clips, caulk, primer, paint, 1x2 stops, hinges, hasp, door pull, door screws, skin screws and door adhesive at Home Depot, Hamilton Mill store (ZIP 30011), Oct 8, 2026; underlayment cap nails at Home Depot, Hamilton Mill store (ZIP 30011), Oct 11, 2026; ground anchors at Amazon.com, sold by Amazon, Oct 13, 2026; Framing angles for the stepped corners, Simpson Strong-Tie A34 (18 ga, G90 galvanized), Connector nails for the A34 framing angles, 0.131" x 1-1/2" galvanized (Simpson Strong-Tie N8 or equal) and two-way latch at Home Depot, Hamilton Mill store (ZIP 30011), Nov 17, 2026; Landscape fabric, enough to cover 10' x 6' at Home Depot, Hamilton Mill store (ZIP 30011), Oct 27, 2026; every other line at Home Depot, Bronx Terminal store, Sep 30, 2026. Not priced yet, so not in the sum: High-edge flashing for the shed roof, galvanized steel L-flashing about 4" x 5", 10 ft pieces.
Every plan here is priced with its doors built from the plan, the cheaper choice for these sizes.
The gravel pad is site prep and sits outside each total; it is shown under the bar, priced as bulk stone delivered by the cubic yard, an average estimate.
The $35 builder's plan
Free to plan. $35 to build from.
Every plan above is free to open, check and price. The builder's plan is drawn from the shed you finish, for one payment. These are real sheets from the 74-sheet plan for the 8x10 gable shed.
Free
- The design in 3D, and every change you make to it
- Every planner check, with its rule and its source
- The materials list priced line by line
- A summary PDF of the design and its checks
$35 once
- Every wall framed, each stud dimensioned from the corner
- The cut list, every cut assigned to a store board
- Rafter angles and a full-size rafter template: cut to this
- Elevations, a building section and the connection details
- The shopping list with store prices and the build, step by step
You check out in the designer, with your design loaded. If the plan has an error, we fix it or refund you within 30 days. Guarantee terms.
Questions
Anything else? Write to us or read the questions about all plans.
Questions about pool pump shed plans
Plan on them: a motor makes heat and a wet pad makes damp. As a guide, 1 sq ft of net free vent area per 300 sq ft of floor puts the 8x4 at 15.4 sq in, split high and low. Your pump manual may ask for more, and our ventilation guide shows where the vents go.
Yes: pump covers and small equipment enclosures are sold ready to assemble. Our plans are for building one yourself: the 8x4 plan comes to at least $2,381 in materials, priced line by line, before tax and delivery. Compare it with a quote for the same size.
The size may not, the wiring probably does. Section R105.2 of the 2021 IRC exempts a one-story shed up to 200 sq ft, and both plans are 48 sq ft or less. Some towns want a permit for any shed, and pool circuits fall under NEC Article 680. Ask your building department, and see the permits guide.
Other ways to browse
Not quite the shed you picture?
Illustration
Illustration
Illustration
Illustration
Illustration
Illustration
Illustration
Illustration
Illustration

Your shed, your numbers
Start from the 8x4. Make it yours.
Change the size, the roof, the doors and the windows. The span checks, the wall bracing and the materials list follow every change. Free, no account.
- Designing
- Free
- Builder's plan
- $35 once
- Account
- Not needed



